Installation to Ceiling Plate
WARNING
•Installer must verify that the supporting surface will safely support four times the combined weight of all attached equipment and hardware.
•Extension column (A) must be fully threaded (six or seven full turns) onto threaded fitting in ceiling plate and then locked with M5 x 10 mm screw (not included).
Screw extension column to ceiling plate (not included) as shown in fig. 1.1. Align the slot with one of the four holes
1 in the ceiling plate (not included) and secure extension column with a M5 x 10 mm screw (not included) as shown in fig. 1.2 and detail 1.
*NOTE: Slotted set screws (not included) are used to jam against the threads of each connecting joint to prevent any excess movement. Do not overtighten screws; overtightening screws will damage threads making it difficult to separate the products.
SLOT
A
UL LISTED ELPMBP01, ELPMBP02,
ELPMBP03 AND CMJ OR ACC SERIES
CEILING MOUNTS (SOLD SEPARATELY)
CEILINGPLATE (NOTINCLUDED)
SLOT
M5 x 10 mm SCREW (NOTINCLUDED)
fig. 1.1
PROJECTORMOUNT (NOTSHOWN)
UL LISTED ELPMBPRG, ELPMBPJF AND PRG OR PJF SERIES (SOLD SEPARATELY)
DETAIL 1
*SET SCREWS (NOTINCLUDED)
M5 x 10 mm SCREW (NOTINCLUDED)
A
fig. 1.2
4 of 6 | ISSUED: |
Visit the Peerless Web Site at www.peerlessmounts.com | For Technical Support Contact Peerless Mounts at |