Projector Alignment
7 | To adjust yaw (swivel) for extension column installation: Loosen screw on projector mount assembly (A) |
indicated below until projector mount can be rotated. Rotate mount to desired position and retighten screw. |
To adjust pitch (forward and backward tilt): Turn knob on back of mount as shown below. Pull knob out and turn by hand for easy adjustment or insert #2 phillips screwdriver in end of knob and turn.
To adjust roll (side to side tilt): Turn knob on side of mount as shown below. Pull knob out and turn by hand for easy adjustment or insert #2 phillips screwdriver in end of knob and turn.
ARROW INDICATES FRONT OF MOUNT
A
KNOB FOR PITCH
ADJUSTMENT
| BACK OF MOUNT | |
SCREW FOR SWIVEL STOP | KNOB FOR ROLL | |
ADJUSTMENT | ||
|
To prevent tampering with the pitch and roll adjustments: Tighten the two tamper resistant security screws | |
| on the projector mount assembly using 4 mm security allen wrench (J) to lock the pitch and roll adjustments as |
shown below.
NOTE: Tighten screws firmly, but do not overtighten. Overtightening can damage the mount.
CAUTION
•Do not adjust pitch or roll while tamper resistant security screws are fully engaged.
•Loosen the two tamper resistant security screws one complete turn before adjusting the projector mount assembly or damage may occur.
TOLOCKROLLTIGHTEN |
|
TAMPER RESISTANT | TOLOCKPITCHTIGHTEN |
SECURITY SCREW | TAMPER RESISTANT |
| SECURITY SCREW |
FRONT VIEW | SIDE VIEW |
|
|
11 of 12 | ISSUED: |
Visit the Peerless Web Site at www.peerlessmounts.com | For Technical Support Contact Peerless Mounts at |