Installing Plates to Projector

CAUTION

•All spacers shall be used where indicated. Not using spacers can cause damage to projector.

•It is the responsibility of the installer to ensure that the projector is properly ventilated.

NOTE: For all POWERLITE models, the manufacturer's product weight must be reviewed to ensure that the weight does not exceed 50 lbs.

Adapter Plate: POWERLITE 1700c, 1705c, 1710c, 1715c, 1810p, 1815p, 1825, S5, 77c, 83+, 822+

2 Use adapter plate (B) as shown. Continue to step 3.

3-Plate Horizontal Configuration: POWERLITE 6100i, 6110i, 7900p

2

Attach adapter plate (B) to side plates (C) using six

M4 x 6 mm socket pin screws (G).

BG

B

C

 

3-Plate Vertical Configuration: POWERLITE 8300i

2

Loosen two #10-32 x 3/8" serrated washer head socket pin

screws (H) on adapter plate (B) and connection block as shown in

 

bottom detail 1. Rotate connection block to 90° as shown in fig. 2.1.

 

Securely retighten #10-32 x 3/8" serrated washer head socket pin

 

screws (H).

 

 

H

B

BOTTOM

DETAIL 1

CONNECTIONBLOCK

2-1

Attach adapter plate (B) to side

 

plates (C) using six M4 x 6 mm

socket pin screws (G)

G

B

B

C

fig. 2.1

7 of 12

ISSUED: 04-01-08 SHEET #: 055-9254-2

Visit the Peerless Web Site at www.peerlessmounts.com

For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.