38 - Connecting the video equipment
In the case of RGB image signals
·Connect the projector’s Computer #2 BNC Port to the video equipment with the component
image cable (available on the open market).
·Connect the supplied RCA Audio Cable (Red/White) to the S-Audio/Audio #2 Port if the
sound is to be output from the projector’s speakers.
Point
·Purchase the component image cable so that one end matches the BCN type port on the
projector and the other matches the port on the video equipment.
·Set the BNC parameter to [RGB] when the connection has been established. (see
page 67)
R/Cr/Pr Port
G/Y Port
B/Cb/Pb Port
Audio Port (white)
Audio Port (red)
To the R ou tput p ort
To the G ou tput p ort
To the B output port
RCA Audio Cable (supplied with the projector)
For component images
Cable (available on the
open market)
To the audio output port L
(white)
To the audio output port R
(red)