Projection - 39
Projection
Images can be projected after all connections have been completed.
Preparations
1
Connect the projector to a computer and video equipment. (see page 25, 35)
2
Remove the Lens Cover.
3
Attach the supplied Power Cord to the projector.
Check to confirm the shape of the projector’s Power Inlet and Power Connector, align the
connector in the correct direction, and then insert it as far as it will go.
4
Plug the Power Plug into the power socket.
The Operation Indicator will be illuminated in orange.
Point
Button operations are not possible when the Operation Indicator is blinking in orange.
War ni ng
·Never look directly into the lens once the power supply has been switched on. Failure to
observe this may result in the powerful light damaging eyesight.
·Ensure that the Power Cord supplied is used. The use of cables other than the one supplied
may result in the outbreak of fire or electric shocks.
Caution
Do not perform any projection tasks with the Lens Cover attached. Failure to observe this
may result in the cover becoming malformed due to heat.
Power Inlet
Power Connector
Power Cord
Power Cord
Socket
Power Plug
Illuminated in orange
Operation Indicator