12

Inserting Batteries in the Remote Control

This section describes how to insert batteries in your remote control.
1. Remove the battery cover.
Slide the catch of the battery cover in the
direction shown by the arrow.
Tip:
Be sure to use fresh batteries of the same type as
the old.
2. Insert batteries.
Be sure to match the polarity to that
indicated on the remote control.
Tip:
•Battery type
Two manganese dry cells R6 (AA)
•Use of 30 minutes per day will require a
change of batteries approximately every 3
months.
3. Replace the battery cover.
Press the battery cover into the remote
control until it clicks firmly into place.