54
Possible Failures

If you think your projector may have failed, first check the indicators on the

unit.

Your projector includes an "operation display indicator" and a "problem/alarm

display indicator" which provide information on projector status.

Operation Display Indicator

Indicator
Status Cause Remedy or Status See
Page
Steady
orange Standby
status (Not abnormal)
Press the Power button to begin projection. 24
Flashing
orange Cool-down
in progress (Not abnormal)
Please wait.
Cool-down* time takes about 2 minutes. 31
You cannot operate the Power button during cool-
down. Press the button again after cool-down ends.
Steady
green Projection
in progress (Not abnormal) 25
Flashing
green Warm-up in
progress (Not abnormal)
Please wait.
Warm-up time is approximately 30 seconds.
After warm-up is complete, the flashing green
indicator changes to steady green.
25
Not lit No power If the lamp has been replaced, check that the lamp
and lamp cover are attached securely. 66
Check the power cord connections. 24
Check power at the outlet. 24
Operation Display Indicator
Problem/Alarm Display Indicator