66
Lamp Replacement
Replace the lamp with a new lamp in the following instances.
A replacement lamp is an optional part (sold separately).
(Model No: ELPLP16)
[When the following message is displayed for 30 seconds after projection
begins: "Lamp Replace. After the replacement of the lamp, reset the lamp
timer under the direction in the user’s manual."]
[When the problem/alarm display indicator flashes red at 1-second intervals.]
[When brightness or picture quality is infer ior to its original state.]
Tip:
•If the lamp does not light, replace it even if the lamp life has not expired.
•To maintain the original brightness and picture quality, replacement messages are set
for approximately 1,400 hours.
If you continue to use the lamp after this period, the possibility of the lamp breaking
becomes greater. When the lamp replacement message appears, replace the lamp
with a new one as soon as possible, even if it is still working.
•Though a replacement message appears at approximately 1,400 hours, individual
lamp characteristics or usage conditions may cause failure before 1,400 hours, and
we recommend that a replacement lamp be kept on hand.
•Contact your dealer for a spare lamp.

Replacement

Tip:
•Install the lamp securely. For safety, wh en the lamp cover is opened, the abnormal
warning display indicator flashes red, and the projector lamp goes out. If the lamp or
lamp cover is installed improperly, the lamp will not light.
A message will be displayed.
Problem/alarm display indicator
flashes red at 1-second intervals