Installation
■ ■ ■ ■
12
Connecting to a Macintosh desktop computer
Before beginning, make sure that the projector and computer
are both turned off.
1. Connect the computer cables.
♦
Note:
Macintosh computer configurations vary. See your
computer manual for the location of the ports needed to connect
your EMP-7500/5500 projector.
* You may need adapters that came with your computer or
purchased from your computer dealer for connecting.
a. Connect either end of the computer cable to the
projector’s Computer In port.
b. Connect the other end of the computer cable to the
monitor or video port where monitor cable is
disconnected from the computer.
c. If necessary, connect the monitor cable to the
projector’s Computer out.
Monitor cable
Computer cable
* MAC
desktop
adapter
MAC monitor
adapter
*Video
cable
adapter