Menu Options
■ ■ ■ ■ ■
■
49
About Menu
The About menu displays the following information about
your projector. Press either multi-purpose button(remote) or
the <Enter> button (control panel) to display the information.
• Image source is computer.
• Image source is video.
RESET ALL Menu
Executing this command resets the settings in all menus to
their factory defaults.
While executing this command, the OSD menu disappears
from a screen and "RESET ALL" will be flashing on the
center of the screen.
Select this item and then press either multi-purpose
button(remote) or the <Enter> button(control panel) to
display the confirmation screen.
Frequency Displays H/V frequency of the current computer.
Resolution Displays Resolution of the current computer.
Refresh Rate Displays Refresh Rate of the current computer.
Lamp Displays the number of hours the current projector
lamp has been used. The color of this display turns red
when the projector lamp is near the end of its normal
life. When this happens, replace the projector lamp
with a new one as soon as possible.
Video Signal Displays the current video signal.
Lamp Displays the number of hours the current projector
lamp has been used. The color of this display turns red
when the projector lamp is near the end of its normal
life. When this happens, replace the projector lamp
with a new one as soon as possible.