14
Using the Remote Control and Remote Operating Range

The remote control is used in the following way.

Procedure
1

Set the R/C switch on the remote

control to the ON position.

2

Point the remote control

transmitter toward one of the

remote control receivers on the

projector and operate the remote

control buttons.

Tip :
• Do not allow sunlight or light from fluorescent lamps to shine directly onto the
projector's remote control receivers, otherwise it may interfere with the reception of
signals from the remote control.
• Set the R/C switch on the remote control to the OFF p osition wh en no t usin g the remote
control. Leaving the R/C switch on will consume battery power.

Use the remote control within the ranges indicated below. If the distance or

angle between the remote control and the remote control receiver is outside the

normal operating range, the remote control may not work.

Using the Remote Control

Remote Operating Range

Operating distance Operating angle
Approx. 10 m (30 ft.) Approx. ±30° horizontally
Approx. ±15° vertically
Power
A/V MuteFreeze
E-Zoom
Esc
Menu
Comp1
Source
Video
Auto
Preset
Volume
P in P
S-Video
Resize
Comp2/YCbCr
Help
Remote control
receiver (front) Power
A/V MuteFreeze
E-Zoom
Esc
Menu
Comp1
Source
Video
Auto
Preset
Volume
P in P
S-Video
Resize
Comp2/YCbCr
Help
Remote control receiver (back)
Before Using the Remote Control