97
Procedure
1
Turn off the projector power, wait
for the cool-down period to end,
and then disconnect the power
cord.
The cool-down period lasts for about 2
minutes. The actual time will vary
depending on the external air temperature.
2
Put your finger into the recess in
the air filter hook, and lift up the air
filter to remove it.
In order to prevent any dust on the air
filter from getting into the projector, be
sure to stand up the projector so that the
handle is at the top.
3
Install the new air filter.
First insert the tabs, and then press down
on the opposite side until it clicks into
place.
Tip :
Dispose of used air filters properly in accordance
with your local regulations.
Replacing the Air Filter