List of Functions 31
Network Menu (EMP-83H/822H Only)When "Network Protect" is set to "On" in "Password Protect", a message is displayed and the settings cannot be changed. You can make changes after
setting "Network Protect" to "Off". sp.19
Sub Menu Function
Wired LAN You can make network settings.
DHCP: You can set whether to use DHCP (On) or not (Off).
If this is set to "On" you cannot set any more addresses.
IP Address: You can input the IP address assigned to the projector.*1
You can enter a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
0.0.0.0, 0.x.x.x, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet Mask: You can input the Subnet Mask for the projector.*1
You can enter a number from 0 to 255 in each field of the address. However, the following subnet masks cannot be used.
0 to 254.x.x.x. 255.255.255.255
Gateway Address: You can input the IP address for the gateway for the projector.*1
You can enter a number from 0 to 255 in each field of the address. However, the following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
MAC Address: You can input the MAC Address for the projector.
PJLink Password Enter a password to use when you access the projector using compatible PJLink software.*1 sp.69
You can enter up to 32 alphanumeric characters.
Web Control
Password
Enter a password to use when making settings and controlling the projector using Web control.*1 You can enter up to 8 alphanumeric characters.
Web control is a computer function that allows you to set up and control the projector by using the Web browser on a computer on which EMP
Monitor is running. sEMP Monitor Operation Guide