Part Names and Functions 7
Rear (EMP-X5/S5 Only)
* Limited to computers with the following operating systems installed.
Windows 98/98SE/2000/Me/XP Home Edition/XP Professional
Macintosh: OS 8.6 to 9.2/10.1 to 10.3
Name Function
ARemote receiver Receives signals from the remote control.
sQuick Start Guide
BSpeaker
CPower inlet Connects to the power cable.
sQuick Start Guide
DMonitor Out port Outputs the image signal from the computer
connected to the Computer input port to an
external monitor. This is not available for
component videog signals or other signals
being input to any port other than the
Computer input port.sp.61
D
C
EGA
B
FIH EComputer input
port
For video signals from a computer and
component videog signals from other video
sources.
FAudio-L/R input
port
Connects to the audio output port for the
equipment you want to project from and inputs
the audio. sQuick Start Guide
GVideo input port For composite videog signals from video
sources.
HS-Video input
port For S-videog signals from video sources.
IUSB port (Type B) When showing a slide show in PowerPoint,
you can use the projector's remote control to
move to the next slide/previous slide if it is
connected to a computer by a USB cable.*
Also, you can use it as a control port when the
projector is controlled by a computer.
Even if the projector is connected to a
computer by a USB cable, you cannot project
the image on the computer. sp.63
Name Function