Problem Solving
When the 
(operation) indicator is lit or flashing normal
When the | (warning) indicator is off | : Lit | : Flashing |
Orange Standby condition
If you press 
, projection will start after a brief interval.
|
|
|
|
| Green | ||
| progress | ||
|
| Power off operations are ignored while | |
|
|
| |
|
|
|
|
|
|
|
|
|
| Projection in |
|
| Green |
| |
| progress | Normal operation is in progress. | |
|
| ||
|
|
|
|
|
|
|
|
Orange Cool-down
in
progress
After
You cannot use the remote control or the projector's control panel during
If the main power switch at the rear of the projector is turned off before
When the indicators provide no help
If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem.
Problems relating to images
●No images appear 
p.37
Projection does not start, the projection area is completely black, the projection area is completely blue, etc.
●Moving images are not displayed
p.37
Moving images played on computer are not displayed.
●The message "Not Supported." is displayed 
p.38
●The message "No Signal." is displayed
p.38
●Images are fuzzy or out of focus 
p.38
●Interference or distortion appear in images 
p.39
Problems such as interference, distortion or black & white checked patterns appear.
●Image is truncated (large) or small 
p.39
Only part of the image is displayed.
●Image colours are not right 
p.40
The whole image appears purplish or greenish, images are black & white, colours appear dull, etc.
(Computer monitors and LCD screens have different colour reproduction performance, so that the colours projected by the projector and the colours appearing on the monitor may not necessarily match, but this is not a sign of a problem.)
●Images appear dark 
p.40
●Projection stops automatically 
p.41
Problems when projection starts | Problems with the remote control |
●Power does not turn on p.41 | ●The remote control does not |
| work p.41 |
36