Epson EMP-TW620 Specifications

Specifications

	Product name		Home Projector EMP-TW620
			*Model lineup varies depending on the country.

	Dimensions		406 (W) ⋅ 124 (H) ⋅ 309 (D) mm (not including feet)

	Panel size		0.7 inch wide

	Display method		Polysilicon TFT active matrix

	Resolution		921,600 pixels (1280 (W) ⋅ 720 (H) dots) ⋅ 3

	Scanning		Analogue		Pixel clock	: 13.5 - 110 MHz
	frequencies
	frequencies				Horizontal	: 15 - 92 kHz
					Horizontal	: 15 - 92 kHz

					Vertical	: 50 - 85 Hz

			Digital		Pixel clock	: 13.5 - 81 MHz

					Horizontal	: 15 - 60 kHz

					Vertical	: 50 - 85 Hz

	Focus adjustment		Manual

	Zoom adjustment		Manual (appox. 1 : 1.5)

	Lens shift		Manual (Maximums: Approx. 100% vertically, 50% horizontally)

	Lamp (light source)		UHE lamp, 170 W, Model No.: ELPLP35

	Power supply		100- 240VAC 50/60Hz 2.7-1.2A
			Power Consumption
			Operating: 245W(100-120V area), 240W(200-240V area)
			Standby:	4.0W(100-120V area), 5.0W(200-240V area)

	Operating altitude		0 – 2280m (0 – 7500ft.)

	Operating		+5 – +35°C (No condensation)
	temperature

	Storage temperature		-10 – +60°C (No condensation)

	Weight		Approx. 5.2kg

	Ports		SCART input			1	D4 + RCA pin jack

			InputA			1	RCA pin jack ⋅ 3

			InputB			1	Mini D-sub 15-pin (female) blue

			HDMI input			1	HDMI

			Video input			1	RCA pin jack

			S-Video input			1	Mini DIN 4-pin

			RS-232C			1	D-sub 9-pin (male)

			Trigger out			1	3.5 mm mini jack

Pixelworks DNXTM ICs are used in this Projector.

Appendix

49

Contents

Page About the Manuals and Notations Used Checking the Components Documentation Table of Contents ■ Problem Solving ■ Maintenance ■ Optional Accessories / Consumables ■ List of Supported Monitor Displays ■ Specifications Features of the Projector Page Part Names and Functions Page • [InputA] port p.12 • [SCART] input port p.12 • [Trigger out] port • [Video] input port p.12 Appearance Setting up Lens shift adjustment Projection methods Connecting Image Sources Preparing the Remote Control Using the remote control Projecting Images When the expected images are not projected Turning the power off Adjusting the Projection Screen Correcting projector tilt Correcting keystone distortion (Keystone) Displaying a test pattern Basic Image Quality Adjustments Image Quality Adjustments Advanced Colour Adjustments Adjusting from the gamma correction values Customized ("Adjust it from the image") ("Adjust it from the graph") Offset Gain Hue Saturation Examining Image Quality Further Page Page Configuration Menu Functions Configuration Menu Color Mode*1 Input Adjustment *2 Color Saturation *2 Tint *2 Sharpness *2 Auto Iris *3 Aspect *1 Zoom Caption *1 Tracking *1 Sync.*1 Position *1 Advanced Auto Setup Keystone Operation User’s Logo Display Input Signal Projection Language Save Memory Load Memory Reset All Reset Lamp Hours Displaying a menu Selecting a menu item Changing settings Problem Solving warning/problem normal Problems relating to images ■No images appear Have you pressed the [Power] button Is the main power switch ■The message "Not Supported." is displayed ■The message "No Signal." is displayed ■Images are fuzzy or out of focus ■Interference or distortion appear in images ■Image is truncated (large) or small ■Image colours are not right ■Images appear dark ■Projection stops automatically Problems when projection starts ■ Power does not turn on Problems with the remote control ■The remote control does not work Maintenance Air filter replacement period Lamp replacement period Appendix Replacing the air filter Replacing the lamp Resetting the lamp operating time Page Optional Accessories / Consumables List of Supported Monitor Displays Analog-RGBsignals/signals input to the [HDMI] input port Specifications ■Angle of tilt ■RS-232Ccable layout DECLARATION of CONFORMITY FCC Compliance Statement For United States Users WARNING Glossary Page Index Page Page General Notice: