Troubleshooting - 71
Lamp Indicator
Extinguished The power is not
switched on
The power is not switched on.
·Check to ensure that the lamp or fan are
correctly attached if the lamp has been
replaced. If the lamp or fan are not correctly
attached, the projector will assume the same
status as if the power has not been switched
on.
·Check the power cord connection.
·Check the power supply to the socket.
31
Indicator Status Cause Recovery and Status Reference
Page
Blinking in Red Lamp error ·First, remove the lamp and check to see if it is
broken (be careful not injure yourself on
broken glass if the lamp is broken). If the
lamp is not broken reset it. Next, plug in the
power plug and turn on the main unit’s
power. If the problem still persists or the lamp
is broken, contact your dealer or nearest
address provided at "International Warranty
Conditions" in "Safety Instructions/World-
Wide Warranty Terms" included in the
package (images cannot be projected unless
the lamp is replaced).
·Check to ensure that the lamp or fan are
correctly attached if the lamp has been
replaced. If the lamp or fan are not correctly
attached, the projector will assume the same
status as if the power has not been switched
on.
84
Blinking in
Orange
Nearing the time
for replacing the
lamp
Prepare a new lamp. It is recommended that
the lamp is replaced as soon as possible, as
there are cases where the time for replacement
is earlier than stated in the conditions of usage.
84
Extinguished (Not an error)
The power has not been switched on or
normal projection is in progress.
Indicator Status Cause Recovery or Status Reference
Page