8 Assembling the Printer
R4C4450 Setup G.
Rev. C
A5 size SAFETY.FM
7/18/00 Pass 0
LProof Sign-off:
ABE K.Tsuno H.Kimura_______
H.Kimura _______
ABE J.Holmes _______
2. While holding the expansion tray vertically, insert th e left leg
into the MP tray until the pin clicks into place in the hole on
the MP tray.
Installing the Face-Up Tray
Install the face-up tray onto the left side of the printer as follows:
1. Locate the output slot on the left side of the printer.
2. Squeeze the metal spring on the right side of the face-up tray
so that the end of the spring is folded down against the tray
as shown below.