Safety Information 75
R4C4450 Setup G.
Rev. C
A5 size SAFETY.FM
7/18/00 Pass 0
R
Proof Sign-off:
ABE K.Tsuno H.Kimura_______
H.Kimura _______
ABE J.Holmes _______
Ozone exposure limit
The print engine shall not exceed 0.02 ppm ozone concentration
TWA (Time Weighted Average).
Minimize the risk
To minimize the risk of exposure to ozone, you should avoid the
following conditions:
❏Use of multiple laser printers in a confined area (see above)
❏Operation in conditions of extremely low humidity
❏Poor room ventilation
❏Long, continuous printing together with any of the above
Printer location
The printer should be located so that the exhaust gases and heat
generated are:
❏Not blown directly into the user’s face
❏Vented directly out of the building whenever possible