To confirm that the Duplex Unit is installed correctly, print a status sheet. If the unit is not listed on the status sheet, try installing it again.

Note:

Keep the packaging materials in case you remove the Duplex Unit in the future.

Multibin Unit

To install the Multibin Unit, follow the instructions below.

Note:

The Multibin Unit cannot be installed at the same time as the optional Shifter. If the Shifter is installed, please remove it before proceeding. For more information see “Shifter” in the Reference Guide.

Removing the Top Cover

Note:

If you have just removed the Shifter, the top cover is already off. In this case, proceed directly to “Installing” below.

1. Make sure the printer is off.

Installing the Options

25