Printing a status sheet
1.Turn the power switch at the front of the printer on. The lights and the display messages are changed in the following order:
All lights come on once and then turn off. The display shows
ROM CHECK.
The display shows RAM CHECK XXXMB, including the actual memory size of standard and optional memory modules displayed in place of XXX.
The display shows SelfTest, and then shows Warming Up. The On Line light comes on.
After about 65 seconds, the display shows Ready.
2.Press the Enter button. The display shows Status Sheet.
3.Press the Enter button again. The message on the display starts flashing and the printer starts printing the status sheet.
4.Check the following points in the printed status sheet:
❏The printer can print the status sheet clearly.
❏The information on the options installed to the printer is printed correctly. If you can find the installed option’s name under Hardware Configurations, it means that the printer can recognize the installed option properly.
Note:
If you installed an optional memory module, Installed Memory shows the total size including both default 16 MB and the optional module’s size. However, if you installed one 256
If the installed option’s name is not listed on the status sheet, make sure the options are connected securely to the printer.
Testing and Connecting the Printer | 35 |