Epson Epson EX3220, EX3220, EX5220, EX6220 Solving Network Problems

Solving Network Problems

Check the solutions in these sections if you have problems using the projector on a network.

Solutions When You Cannot Access the Projector Through the Web

Solutions When Network Alert E-Mails are Not Received

Parent topic: Solving Problems

If you are unable to access the projector through a web browser, make sure you are using the correct ID

and password, which are case sensitive.

• For the user ID, enter EPSONWEB. (You cannot change the user ID.)

• For the password, enter the password set in the projector's Network menu. The default password is

admin.

• Make sure you have access to the network the projector is on.

Note: The user ID and password are case sensitive.

Parent topic: Solving Network Problems

If you do not receive an e-mail alerting you to problems with a projector over the network, try the

following solutions:

• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the

projector, it cannot send an e-mail.)

• Make sure you set up the projector e-mail alert settings correctly on the projector's network Mail menu

or in the network software.

• Set the Standby Mode setting to Communication On so the network software can monitor the

projector in standby mode.

Parent topic: Solving Network Problems

Related references

Projector Setup Settings - ECO Menu

Related tasks

Setting Up Projector Network E-Mail Alerts

144