2-10 Setting up the Scanner
R4C3820
Rev. C
A5 size SETUP.FM
4/9/01 Pass 0
LProof Sign-off:
KOW S.Koide C.Fujiwara
J.Miyakoshi
NOC Lee
Initializing the Scanner
Before connecting the scanner to your PC, follow the steps below to
make sure that the scanner is operating properly.
1. Open the Automatic Document Feeder so you can see the
operation of the scanner during initialization.
2. Turn on the scanner by pressing the OPERATE button.
3. Make sure the carriage moves slightly to the right and then
back to its original position, and the fluorescent lamp on the
carriage flashes.
The READY light comes on, meaning the scanner has
completed initialization.
4. Turn off the scanner.
If the scanner does not work as described, turn it off. Make sure
the power cord is firmly plugged in and that you have released
the transportation lock, then try again.
cCaution:
Whenever you turn off the scanner, wait at least 10 seconds before
turning it back on. Rapidly turning the scanner on and off can
damage the scanner.
carriage
(in the home position)