Installing the EPSON Scanning Utilities

The EPSON Scanning Utilities include EPSON Scan! II and EPSON TWAIN. Scan! uses TWAIN to capture images and then saves and exports these images in a variety of file formats. It also calibrates your scanner and output devices to produce images nearly identical to the originals.

EPSON TWAIN is a set of drivers designed to access your scanner’s advanced features for any software that supports TWAIN. TWAIN drivers are an industry standard for acquiring image data from a variety of external sources without leaving your application program.

Follow these steps to install the EPSON Scanning Utilities:

1.Start Windows 3.1 or Windows 95, if necessary.

Note:

If you are running Windows 95 and you see the New Hardware Found screen, select Do not install a driver and continue with steps 2.

2.Insert the EPSON Scanning Utilities diskette in a diskette drive.

3.If you are running Windows 3.1 Program Manager, open the File menu and choose Run. You see the Run dialog box. Type A: SETUP (or B : SETUP if you inserted the diskette in drive B) in the Command Line box and choose OK.

If you are running Windows 95, click Start and then select Run. Select A: SETUP (or B : SETUP) from the Open pull-down menu, if necessary, and choose OK.

4.After a few moments, you see the initial setup screen. Choose OK to continue.