Epson II SETUP, SETUP, B:SETUP, D:SETUP, A: SETUP, D: SETUP

3.If you are running Windows 3.1 Program Manager, open the File menu and choose Run. You see the Run dialog box. Type A: SETUP (or B:SETUP, or D:SETUP, etc.) in the Command Line box and choose OK.

If you are running Windows 95, click Start and then select Run. Select A: SETUP (or B : SETUP, or D: SETUP, etc.) from the Open pull-down menu, if necessary, and choose OK.

4.You see the initial Setup screen. Choose Continue to accept the default directory in which the program will install its files. Or type in another directory and choose Continue.

5.On the next screen, enter your name and a company name; then choose Continue.

6.Verify the name and company at the next screen and choose

OK.

7.The program begins copying files. Follow the instructions on the screen and change diskettes as prompted (if installing from diskette).

8.The setup program creates an Image-In Easy Pack program group. When the installation is done, select any plug-ins you may have for the program and choose Continue.

9.You see a ReadMe file containing instructions for installing the FotoTune LE program that comes with Image-In on separate diskettes. Follow these instructions later to install FotoTune. For now, choose OK.

10.At the next screen, choose OK again and remove the last diskette from the drive (or the CD from the CD-ROM drive).

11.If you are running Windows 3.1, double-click the Image-h for Epson icon in the Image-In Easy Pack program group.

14