Before you start, make sure the batteries are installed and the camera is turned on, as described on pages

10 and 11.

1Turn the Mode dial to manual.

If you want to turn the LCD screen off to save battery power, press the DISP button twice. You will have to use the viewfinder instead of the screen to frame your shot.

2If you want to adjust the quality (resolution) or other settings, press the MENU button. See page 22 for a list of available settings. For more information, see the Camera User’s Guide on your computer.

3Make sure you are at least 20 inches (50 cm) away from your subject.

To zoom in on your subject, press the T (telephoto) button.

To zoom out, press the W (wide-angle) button.

4Center your subject in the middle of the square focus frame on the screen.

The default flash setting is automatic, indicated by

the icon on the LCD screen. The flash will go off automatically whenever necessary.

20