You can also modify the frames or create original frames using PIF Designer. See pages 14 to 15 for instructions on installing the software.
To take a picture with a frame:
1Turn the Mode dial to 
automatic or 
manual.
2Press the 
P.I.F. button. The first frame stored in the camera is displayed.
If you want to select a frame stored on the memory
card, press the r button after pressing the 
P.I.F. button.
3Select the frame you want by using the u d buttons, then press the OK button. The selected frame is displayed on the LCD screen.
Frames are available in both horizontal and vertical designs. Make sure you choose the right orientation for the picture you want to take.
4Press the 
T (telephoto) button to zoom in on your subject if necessary.
5Center your subject in the frame.
6Press and hold the shutter button halfway. The focus frame turns green and the focus is set.
26