Epson LQ-800 Printing with the Cut Sheet Feeder

Printing with the Cut Sheet Feeder

1.Turn the power ON with the switch on the left side of the printer, as shown in Figure 2-8.

Figure 2-8. Turning the power on

2.When you turn the power ON:

•The print head moves to the left side.

•The POWER, READY, and ON LINE lights glow green.

•The red PAPER OUT light goes on. (The PAPER OUT light remains on until paper is fed into the printer.)

3.Now print a document with your word processor as you normally would. When you print a document:

•The print head moves to the center of the platen to facilitate paper loading.

•The feeder rollers feed one sheet of paper into the printer, and position the page with a one-inch margin at the top. (See the previous note “Setting up your word processor for a cut sheet feeder. . ." for information on adjusting margin and page length settings.)

2-9