4.Hold the cut sheet feeder on each side, press the release levers as shown in Figure 2-9, and lift the unit off the printer.

Figure 2-9. Removing the cut sheet feeder

Remember, if you decide to print with another type of paper feed system, such as the optional tractor feed, you’ll have to:

•Reset DIP switch 1-8 from ON back to OFF. (Don’t forget to turn the power OFF then ON again so the printer will record the new setting.) Reset DIP switch 1-7 (skip-over perforation) if you’re using continuous-feed paper.

•Check any settings you might have changed in your word processor to compensate for the cut sheet feeder.

•Replace the original front cover if you’re loading individual sheets of paper (you can leave the narrow front cover on if you’re using the optional tractor feed unit).

2-11