5Remove the cassette from its package. Then remove the red paper strip from the end.
6Position the cassette as shown below.Plastic point should face up
Covered ends of the ribbon should face out
7Carefully align the cassette and its ribbon with the slot, then gently push in the cassette until it clicks into place beneath the latch.
Caution
You must align the cassette and its ribbon with the slot or you will damage it when you slide it in.
8 Flip up the ink cover and push it closed.9 Slide in the printer until it stops.10Push in on the printer lock as you turn it clockwise to tighten it.If it doesn’t tighten, push the printer in further and try again.11 Flip up the lock cover.Caution
Make sure to lock the printer securely and close the lock cover completely or the printer won’t print.
Loading Paper
1Open the paper cassette lid.2Load up to 20 sheets of paper from the included paper package. Position the paper with the shiny side face up, with the wide bordered edge facing the hinge of the cassette, and the narrow bordered end facing the open end of the cassette.
Wide border
Narrow border
Shiny side up
Caution
Don’t remove the perforated borders on the paper before you print.
The paper may jam or the printer may malfunction when it loads the paper.
Don’t touch the shiny side of the paper or it will become discolored.
3 Close the cassette lid.4 Slide the cassette all the way into its slot, open end first, until it clicks into place.
5Close the printer cover.Inserting the Remote Control
Batteries
1 Press in on the top of the battery cover on the back of the remote control. Then slide the cover down and off the remote.
2Insert the batteries as shown here, making sure the + and – ends face the right way. Then push them down flat.
+
+
3Place the cover into the grooves and slide the cover all the way up until it clicks into place.