5 Install software

Your software works with Windows® 2000, XP, XP Professional x64 Edition, and Windows Vista®, and Mac OS® X 10.3.9, 10.4.x, and 10.5.x.

Windows

1 Make sure the NX100 Series is NOT CONNECTED to your computer.

Note: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable.

2 Insert the NX100 Series CD.

With Windows Vista, if you see the AutoPlay window, click Run Epsetup.exe. When you see the User Account Control screen, click Continue.

3 Click Install and follow the on-screen instructions.

4 When prompted, connect the USB cable. Use any open port on your computer.

5

6

Note: If installation doesn’t continue after a moment, make sure you securely connected and turned on the NX100 Series.

Follow the on-screen instructions to install the rest of the software and register your NX100 Series.

When you’re done, remove the CD.

You’re ready to copy, print, and scan! See the Quick Guide or your on-screen Epson Information Center for instructions.