Epson P-2000 Viewing Files on a TV

Epson P-2000

Supported audio formats

File	Audio codec	Detail
extension
.m4a	AAC (MPEG4)	Maximum bit rate: 320 kbps
.aac		(48 kHz, 16 bit Stereo)
.mp3	MP3	Maximum bit rate: 320 kbps
		(48 kHz, 16 bit Stereo)

To start playing an audio or video file, just select it and press the OK button.

Note the following when playing video and audio:

❏All videos are played with the LCD resolution (640 ⋅ 480 pixels).

❏While the P-2000 is playing audio, it turns off the LCD to conserve battery power. The LCD comes back on when you press any button.

❏You can select audio files to use as slide show background music using the pop-up menu.

❏You can listen to audio using headphones. Simply insert the headphone cable into the headphone connector on the side of the P-2000.

The following table describes how the buttons work while playing audio and video files:

Button	Audio function	Video function
OK	Pause (press OK again to restart).
Cancel	Stop the audio or video and return to the previous screen.
Up	Raise the volume.
Down	Lower the volume.
Left	Play the previous audio file.	Rewind.
	Press and hold to rewind.
Right	Play the next audio file.	Fast forward.
	Press and hold to fast
	forward.

Viewing Files on a TV

You can connect the P-2000 to a TV or AV projector and view your images, videos, and slide shows.

You’ll need a camcorder-to-TV/VCR audio/video cable (A/V cable with 3.5 mm mini-plug to 3 RCA phono plugs). You can purchase the cable at an electronics store.

1.Connect the three RCA plugs to the video and audio IN jacks on your TV.

2.Connect the mini-plug on the other end to the A/V Out connector on the side of the P-2000. The LCD screen turns off.

3. Set the TV display to video input from the P-2000.

Note: Some TVs may crop your images on the top and bottom.

You can now use all of the P-2000 controls to play slide shows, photos, and videos on your TV.

11/04 Epson P-2000 - 9