Setting the clock

Your camera can record the time and date of your
pictures automatically. When you transfer pictures from
the camera to your co mputer, you can see e xactly when
each shot was taken.
In order to have the time and date recorded, you need to
set the camera’s clock using the camera’s LCD monitor,
or by using the Set Time feature described below. The
camera’s clock will continu e to ke e p t i me accurately until
you replace the batteries. See page 1-10 for instructio ns
on setting the camera’s clock using the LCD monitor.
Follow these steps to set the camera’s clock from your
computer:
1. Click the Set Time button. The Set Camera Tim e and
Date dialog box appears. The camera’s time and date
settings are shown. If you have not made the time
and date settings in your camera, the computer’s
time and date settings are shown.
2. Use the arrows to change the time and date. If you
want to set your camera to your computer’s time an d
date, click the Copy From Computer button.
3. Click OK. EPSON Photo!2 updates the time and date
in your camera.

Changing the camera ID

If you want to change the name that is used to identify
the camera when it is connected to a computer, simply
type a new name into the Camera ID edit box. The
camera name appears on the introductory screen when
you start EPSON Photo!2 and in the About dialog box.
You can also see your camera ID by clicking on the
Photo Info button.
About button
Click the About button to see an introductory screen
showing the camera ID and firmware versi on. Click OK
to return to the Setup menu.
LEPSON Photo!2 Rev.C
A5 size Chapter 2
5/8/98 pass 0
2-24 Using EPSON Photo!2