When your camera is not connected to the computer, this
menu is not accessible. Make sure your camera is
properly connected to the computer, following the
instructions on page 2-22.
Controlling the camera from yourcomputer
The Control Options box contains a display panel and
settings that correspond to the control buttons on the top
of your camera. You can change camera settings by using
the controls in this box, just as you would use the control
buttons on the top of the camera. When the camera is
connected to the computer, the only control you can use
on the camera itself is the power switch.
The display panel on the computer and the display panel
on the camera are updated whenever the image qualit y
setting, flash mode, or picture count changes.

Selecting the image quality setting

Use the arrow in the Mode box to select an image contro l
setting:
PhotoPC 600 PhotoPC 700
Standard 640 × 480 pixels 640 × 480 pixels
Fine 1024 × 768 pixels 1280 × 960 pixels
Super Fine 1024 × 768 pixels 1280 × 960 pixels
Monochrome
Fine 1024 × 768 pixels 1280 × 960 pixels
Monochrome
Super Fine 1024 × 768 pixels 1280 × 960 pixels
You can switch freely between these settings and mix
pictures of varying image quality in the camera. Keep in
mind that the camera’s picture capacity will vary
accordingly. See your camera’ s User’s Guide for more
information on the image quality settings.
2
R
EPSON Photo!2 Rev.C
A5 size Chapter 2
5/8/98 pass 0

Using EPSON Photo!2 2-19