74
Note:
You can identify the status of the printer condition. The ink part of
the black or color ink icon displayed in the LCD panel flashes when
the ink runs low. When the ink runs out, the entire ink icon flashes
and a message is displayed.
2. Check that the message “ink out” is displayed in the LCD
panel and press the maintenance button. This message is not
displayed if there is some ink left. In this case, press the
maintenance button, make sure Ink Cartridge Replacement is
selected, and press the Select button. To find out which
cartridge requires replacing, see “Checking the Ink Supply”
on page 71.
3. Follow the instructions on the screen and press the Custom 1
button. The ink cartridge moves slowly to the ink replacement
position.
cCaution:
Do not move the print head by hand, as this may damage the
printer. Always press the (maintenance button to move it.
4. Lift up the ink cartridge clamp as far as it will go. Take the
cartridge out of the printer. If the cartr idge is empty, dispose
of it properly. Do not take the used cartridge apart or try to
refill it.
wWarning:
If ink gets on your hands, wash them thoroughly with soap
and water. If ink gets into your eyes, flush them immediately
with water. If discomfort or vision problems remain after a
thorough flushing, see a physician immediately.