Epson PM 200 Taking PictureMate Pal With You, Related Documentation

PictureMate Pal (PM 200)

Taking PictureMate Pal With You

PictureMate Pal’s handle makes it easy to carry short distances, or you can take it along in the optional carrying case (part number PMBAG06).

If PictureMate Pal is going to travel a longer distance, pack it carefully to protect it from damage.

Caution: Keep PictureMate Pal out of the sun and don’t leave it in your car or other location where it can get too hot or too cold. Otherwise, PictureMate Pal may be damaged or ink may leak.

1.Press the On button to turn off PictureMate Pal.

2.Wait until the On light goes out, then unplug the power cord from the power outlet.

3.Remove all paper and printed photos.

4.Unplug the power cable and any connected USB cables from PictureMate Pal.

5.Close the paper support and output tray.

6.Pack PictureMate Pal in the box that it came in or in the optional carrying case. Place the power cable and adapter in the accessory box that came with PictureMate Pal and pack it with the PictureMate Pal.

Caution: Make sure the photo cartridge is installed. Do not remove the photo cartridge before transporting. Don’t place PictureMate Pal on its side or upside down, or ink may leak.

Note: If your prints don’t look as good after PictureMate Pal has been moved, try aligning the print head.