Epson powerlite 1815p setting is 0000.), You see this screen:, 128Fine-Tuningthe Projector, password, select Yes and press Enter, Then press the Menu button to exit the screen

You see this screen:

2.Use the pointer button to select Password and press Enter.3.When you see a message asking if you want to change the

Hold down	password, select Yes and press Enter.
4.	Hold down the Num button on the remote control and use
	the numeric keypad to enter a four digit password. (The default
	setting is 0000.)
5.	When you see a confirmation message, reenter the password.
	Then press the Menu button to exit the screen.

To set security options, access the Password Protect screen as described above, and then turn on any of the following options:

■Power On Protect to prevent unauthorized use of the projector. After the projector is plugged in and turned on, you must enter a password to use the projector. For details, see page 129.

■User’s Logo Protect to prevent your custom screen and display settings from being changed. None of the User’s Logo features in the Extended menu can be changed when the User’s Logo Protect function is enabled. For details on creating a custom screen, see page 129.

■Network Protect to lock the Network settings in the menu system (see page 57).

128Fine-Tuning the Projector