1-10 Installing the Ink Cartridges and Loading Paper
R4C4860
Startup Guide Rev. C
INST.FM A5 size
11/29/00
LProof Sign-off:
DAI K.A. Kobayashi T. Morita
K. Nishi
DAI K. Ramsey
12. Press the Pause button. The print heads move and the paper
automatically feeds into the printing position. READY appears
on the LCD panel.
Note:
Even if you do not press the Pause button, the print heads move
and paper feeds into the printing position automatically. READY
appears on the LCD panel.
Now you are ready to print on roll paper. Make the printer driver
settings, then send the print job. See “Printing From Your PC” on
page 4-2 or “Printing From Your Macintosh” on page 4-8.
Note:
❏Allow time for the ink to dry thoroughly after printing to ensure the
printout quality.
❏If you do not use the paper set above, remove it from the printer.
When you use roll paper, set the paper set lever to the released
position, and wind it up. When you use cut sheets, remove the paper
from the printer and store it separately.
Loading cut sheet media
To load cut sheet media longer than 279 mm (long edge of letter
size), see the next section. To load paper with a length of A4/letter,
A3/US B, Super A3/B, see “Loading cut sheet with a length of
A4/Letter, A3/US B, and SuperA3/B” on page 1-13.
If you are printing on thick paper (0.5 to 1.6 mm), see your Online
Guide.