6
Using an Optional Interface Card 6-3
R4C4860
Startup Guide Rev. C
CARD.FM A5 size
11/20/00
R
Proof Sign-off:
DAI K.A. Kobayashi T. Morita
K. Nishi
DAI K. Ramsey
4. Use a cross-head screwdriver to remove the two screws
securing the shield plate to the optional interface slot; then lift
off the plate. Be sure to keep the screws; you may need to use
them again when you re-install the shield plate.
5. Set any DIP switches and jumper on the card, if necessary. See
the interface card’s documentation for details.
6. Slide the interface card along the slots on both sides of the
interface compartment. Push it in firmly to fully insert the
connector at the rear of the interface c ard into the printer’s
internal socket.