4
Printing and Printer Management 4-9
R4C4860
Startup Guide Rev. C
MANAG.FM A5 size
11/29/00
R
Proof Sign-off:
DAI K.A. Kobayashi T. Morita
K. Nishi
DAI K. Ramsey
2. Select the paper size you loaded in the printer from the Paper
Size list.
3. Select the type of paper you loaded in the printer from the
Paper Source list.
4. Make settings for Orientation and Reduce or Enlarge as
required.
5. When roll paper is used, set the R oll Paper Option as requir ed.
Auto Rotate (unavailable for Roll Paper [Banner])
If your document length is shorter than the printable width
of the roll paper, the document will be turned automatically
by 90 degrees and printed crosswise when you select Auto
Rotate. You can save paper by using this function.
Auto Cut
Roll paper will be cut automatically after a d ocument is
printed when you select Auto Cut.
Print Page Line
Page lines will be printed on the right side and be low the
document for manual cutting when you select Print Page
Line.
Save Roll Paper (available only for Roll Paper [Banner])
Select this check box when you wish to save roll paper. The
blank portion of the last page of your document is not fed
through the printer.
6. After making your settings, click the OK button to close the
Page Setup dialog box.
Note:
You cannot print from the Page Setup dialog box. You can only print
from the Print dialog box.