Epson Pro 4480 Set Up and Turn On the Printer, Install Ink Cartridges, 3 Raise both ink levers, 1 Press the power button to turn on the printer

Set Up and Turn On the Printer

1 Connect the power cord to the AC inlet on the back of the printer. (Do not connect the printer cable yet.)

2 Plug the other end of the power cord into a properly grounded electrical outlet.

3 Insert the paper tray into the slots at the front of the printer.

AC inlet

Install Ink Cartridges

Power button

1 Press the power button to turn on the printer.2 Press both ink compartment covers to open them.3 Raise both ink levers.4 Remove each ink cartridge from its package and gently shake the cartridge.

Note: The first time you install ink cartridges, the printer uses some ink to charge the printing system, so print yields may be lower with the first cartridges. Subsequent ink cartridges will last for their full rated life.

5 Install the ink cartridges in the printer. Hold each cartridge with the arrow pointing toward the printer, then insert it into its slot. Make sure you insert each cartridge in the correct slot.