Windows
1 Make sure your computer and printer are turned on but the printer is NOT CONNECTED to your computer.
Note: If you see a Found New Hardware Wizard screen, click Cancel and disconnect the USB cable.
2 Insert the Epson Stylus Pro 4880 printer CD.
Note: With Windows Vista, if you see the AutoPlay window, click Run Epsetup.exe. When you see the User Account Control screen, click Continue.
3 Click Install.
Note: If you see message asking if you want to install or run various installation programs, select Continue,
Continue Anyway, or Install this driver software anyway.
4 When you see a window asking you to connect the printer, connect the USB cable.
Note: With Windows XP, if you see a Found New Hardware Wizard screen after you connect the printer, select No, not this time and click Next. Then click Next again.
Note: If installation doesn’t continue after a moment, make sure you securely connected and turned on the printer.
5
6
Follow the on-screen instructions to install all the necessary software
and manuals, and place a link to the
Epson Professional Imaging Website on your desktop.
When you’re done, click Exit and remove the CD.
Load Roll Paper
1
2
Slide the black paper stop off the end of the spindle. | Tab |
If the paper has a 2-inch core, remove the adapters by pressing the four tabs.
Note: Make sure your hands are clean, and avoid touching the printable surface of the paper. Try to handle paper by the edges. Make sure you don’t rub or scratch the coating or dent the edges of the paper.
3 Position the roll so the paper unwinds as shown, then slide it onto the spindle.
4
5
Slide the black paper stop back onto the spindle. Insert it firmly into the end of the roll.
Open the roll paper cover.
6 Place the paper and spindle in the printer as shown, with the black end on the left.
Paper source button