Epson R-D Inserting the battery, 13Getting Started, On:, Off:, in the battery charger, Indicates the battery is charging, 2.Place the battery into the battery charger

1.Connect the power cord that came with the camera to the battery charger, then plug it into a power outlet.

2.Place the battery into the battery charger.

3.Take the battery out when the charge lamp turns off. After charging the battery, unplug the battery charger’s plug from the outlet.

Note:

❏The charging time for the battery may differ depending on the temperature or the battery’s remaining charge.

❏During charging, the red lamp indicates the following status:

On:	Indicates the battery is charging.
Off:	Indicates charging is complete or the battery is not fully seated
	in the battery charger.

Inserting the battery

Your camera uses the lithium-ion battery (EU-85) provided. Only use an Epson Li-ion EU-85 battery with the camera.

13Getting Started