Epson R-D Basic Setup menu, MENU, ENTER, ENTER, Select, Press the, Basic Setup, Camera Settings, Use the JOG dial to select

Function	Description
Calibrate Needles	Displays the Needle Calibration menu to adjust
	the following four needles: E (number of
	remaining photos), R (photo quality), E
	(remaining battery power), and A (white
	balance). These settings are indicated on the
	status gauge.
Initialize Settings	Resets the current settings (except date and
	time settings) to their default values.

Basic Setup menu

How to open the menu

To open the Basic Setup menu, follow the steps below.

1.Press the MENU button in playback mode. The Main menu is displayed.

2.Use the JOG dial to select Camera Settings, then press the ENTER button. The Camera Settings menu is displayed.

3.Select Basic Setup and press the ENTER button. The Basic Setup menu is displayed.

Function	Description
Time and Date	Sets the date (year, month, and day) and time
	(hours and minutes).
Date Format	Selects date display format from the following:
	YYYY/MM/DD (default setting)
	MM/DD/YYYY
	DD/MM/YYYY
Power Save Timer	Selects the length of time before the camera
	enters Power Save Timer mode.
	Choices include 3 min, 5 min (default setting),
	10 min, or 20 min.
Sequential Numbering	Specifies whether to continue numbering
	images sequentially when you replace a
	memory card.
	On (default): sequential numbering continues
	even if the memory card is replaced.
	Off: numbering resists at 1 when the memory
	card is replaced.
LCD Brightness	Sets the brightness of the LCD display.
Language	Selects the language used on the LCD menus:
	Japanese, English, French, German, Italian,
	Spanish, Dutch, T-Chinese

4

4

4

4

4

4

4

4

4

4

Using the LCD Display 42