7.Focus on the subject again and press the shutter button down.
Note:
For more information, see the documentation for your flash.
Numbering Your Photos Sequentially
You can number your photos in sequence across different memory cards.
1.Use the JOG dial to select Sequential Numbering in the Basic Setup menu, and press the ENTER button. For details on using the menu, see “Basic Setup menu” on page 42.
The Sequential Numbering screen is displayed.
On (default) | Numbering continues even when the |
| memory card is replaced. |
Off | Number is reset to 1 when the memory |
| card is replaced. |
2.Use the JOG dial to highlight On or Off, and press the ENTER button. The new setting is saved and the screen returns to the Basic Setup menu.
Calibrating the Needles on the Status Gauge
You can check the number of remaining photos, photo quality, remaining battery power, and white balance using the status gauge on the top of the camera. There are 4 needles on the gauge. If any of these needles becomes inaccurate, follow the steps below to adjust it.
1.Use the JOG dial to select Calibrate Needles in the Camera Settings menu, and press the ENTER button. The Needle Calibration screen is displayed. For details on using the menu, see “Camera Settings menu” on page 41.