![Clip the tubes in the clip](/images/new-backgrounds/109053/1090537x1.webp)
Clip the tubes in the clip
7) Adjust the tubes
Now finished
Adjust the tube length and move the cartridge car. Insure there will no block and collision when the tubes moving with cartridge car .Insure there's plenty length of tube to make the cartridge cart can thoroughly move to the left side.
The tube is excessive long, it The tube is twist ,it is not ok. In this situation ,it is ok is not ok.
8)、The eighth step
Insert the electrical source | Power on the printer to check | |
line suitably |
| whether the printer works well |
9)、The ninth step: | Checking the printing head |