Epson Stylus Photo R260

Caution: Do not touch the area shown below when you are changing ink cartridges.

5. Lift up the cartridge cover.

8.Remove the yellow tape from the bottom of the ink cartridge.

Caution: You must remove the yellow tape from the cartridge before you install it; otherwise, print quality may decline or you may not be able to print.

If you have installed an ink cartridge without removing the yellow tape, take the cartridge out of the printer, remove the yellow tape, and then reinstall it.

Do not remove the transparent seal from the bottom of the cartridge; otherwise, the cartridge may become unusable.

Do not remove or tear the label on the cartridge; otherwise, ink will leak.

6.Press in the tab on the back of the cartridge and lift the cartridge out of the printer. Dispose of it carefully.

Warning: Keep ink cartridges out of the reach of children and don’t drink the ink.

If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water. If discomfort or vision problems continue after a thorough flushing, see a doctor immediately.

7. Unwrap the new ink cartridge.

Caution: Be careful not to break the hooks on the side of the ink cartridge when you remove it from the package.

Always install an ink cartridge immediately after removing the old cartridge. If the cartridge is not installed promptly, the print head may dry out and be unable to print.

9.Lower the cartridge into the holder, with the green circuit board facing the front. Then gently push the cartridge down until it clicks into place.

10.If you need to replace another ink cartridge, repeat steps 6 through 9 before continuing with step 11.

6 - Epson Stylus Photo R260

9/06