Epson Stylus Photo R260
To print on a small CD
Note: Use one CD/DVD at a time.
Caution: Before you position the CD or DVD, make sure that no dust or dirt is on the CD/DVD tray, as this may damage the disc’s data side.
Be sure to use the CD/DVD tray provided with this printer. If you use another CD/DVD tray, there may be a gap in the print position and printing may not be performed properly.
Make sure you always use the small CD ring when printing on
Always use this piece with
4.Gently insert the CD/DVD tray along the base of the front tray until the marks on the CD/DVD tray and the front tray match each other.
Caution: Make sure both sides of the CD/DVD tray slide underneath the brackets on the front tray.
Do not insert the CD/DVD tray while the printer is printing; otherwise, your printer may be damaged or the surface of the CD or DVD may become dirty or scratched.
Make sure the CD/DVD | Make sure the |
tray slides under the | arrow marks |
bracket (on both sides) | match |
5.Follow the instructions in “Printing Your Design” below to print with Epson Print CD.
Designing CDs and DVDs
You can use the Epson Print CD program (included on the Printer Software
Printing Your Design
After you have created your design and loaded a CD or DVD, you’re ready to print.
1.Open the File menu and select Print.
2.Make sure EPSON Stylus Photo R260 Series (Windows) or Stylus Photo R260 (Macintosh) is selected.
3.Select CD/DVD or CD/DVD Premium Surface as the Media Type setting.
4.Select None as the Print Confirmation Pattern setting (Windows) or Test Print Pattern setting (Macintosh).
9/06 | Epson Stylus Photo R260 - 9 |