Epson RP-300, RP-310 user manual ? Caution, Page

Models: RP-310 RP-300

1 21

Page 12

Emulation

Paper low detect (? 1)

(? 1) The detecting function of [Paper Low] is an option.

Please set Dip Switch (2-6) [OFF] if you don ’t need any option.

If Dip Switch is [ON] without any special option purpose. Printer detects [Paper is Low] and it could cause error.

Turn off the printer while removing the DIP switch cover to prevent an electric short, which can damage the printer.

1.Make sure the printer is turned off.

2.Remove the screw from the DIP switch cover. Then, take off the DIP switch cover as shown in the illustration below.

3.Set the switches using a pointed toll, such as tweezers or a small screwdriver.

4.Replace the DIP switch cover. Then, secure it with the screw.

Page - 11-

Image 12

Contents

All specifications are subjected to change without notice RP-300Receipt Printer User’ manual TABLE OF CONTENTS 2. Setting up the printer6. Specifications 7. Command List1. Parts Identifications Page2. Setting Up the Printer 2-1. UnpackingPage 2-2. Connecting the Cables Page2-2-1. Interface Connector Serial interfaceUSB interface Page2-2-2. Cash Drawer Connector Centronics Parallel interfacePage 2-3. Loading the Roll Paper PagePage 6. Pull out a small amount of paper, as shown. Then, close the cover7. Tear off the paper as shown 2-4. DIP SWITCH SETTING 2-4-1. Serial Interface SpecificationDIP Switch Set 1 Functions DIP Switch Set 2 Functions2-4-2. Parallel Interface Specification DIP Switch Set 1 FunctionsDIP Switch Set 2 Functions Page? CAUTION Page? CAUTION Page3-2. Error indicating 3. Control panel and other functions3-1. Control panel Control Panel4. Self Test Running the self testCompleted 5. Hexadecimal Dump6. Specifications 6-1. Environmental Requirments6-2. Reliability 6-3. Certification7. Command List Cancel user-defined charactersPage ESC ?Page MEMO PageMEMO PageMEMO Page