Manuals / Brands / Computer Equipment / Computer Monitor / Epson / Computer Equipment / Computer Monitor

Epson S1C33 3.3 Starting Up and Terminating Procedure of Debugging, Note

1 30

Download 30 pages, 203.69 Kb

3 TARGET PROGRAM AND DEBUGGING

3.3 Starting Up and Terminating Procedure of Debugging

Follow the procedure below to start debugging.

1.Make sure the power of the target board and personal computer are off.

2.Connect the S5U1C330MxD1 board to the target board in which the debug monitor is implemented and connect the S5U1C330MxD1 board to the personal computer with the RS232 cable.

3.Turn the target board on and then start the debug monitor.

4.Turn the personal computer on and start the debugger db33 in debug monitor mode from the work bench wb33 or DOS prompt.

Example: db33 -mon -b 115200 -p 33104_m.par

Follow the procedure in order from Step 4 to Step 1 to terminate debugging and for power off.

Note: When connecting and disconnecting the RS232C cable, make sure the target board and the personal computer are off.

S1C33 FAMILY DEBUG MONITOR	EPSON	11
OPERATION MANUAL

Contents

Page © SEIKO EPSON CORPORATION 2001 All rights reserved Devices Development tools S1C33 Family processors Development tools for the S1C33 Family Page TABLE OF CONTENTS Preface Table of Contents 1 S5U1C330M2S Package 2 Implementing the Debug Starting Up and Terminating Procedure of Debugging Page 1 S5U1C330M2S Package 1.1 Features 1.2 Components of S5U1C330M2S Package 1.3 Installation src dmt33xxx 2 Implementing the Debug Monitor 2.1 Resources Required for the Debug Monitor 2.2 Starting Up the Debug Monitor 2.3 Building an Application Program 2.4 Creating Communication Control Routines (2) void m_snd_1byte(unsigned char) Example: m_snd_1byte( ) of "m3s_sci.s (3) unsigned char m_rcv_1byte( ) 0:received normally 1:framing error (4) void m_dummy_rd( ) Example: m_dummy_rd( ) of "m3s_sci.s (5) void m_ver_rd( ) Example: m_ver_rd( ) of "m3s_sci.s (6) Sample command file for building 3 Target Program and Debugging 3.1 Notes for Creating Target Programs 3.2 Parameter File for Debugging 3.3 Starting Up and Terminating Procedure of Debugging 3.4 Debugging Method 3. Debugging in the Flash memory Notes 3.5 Precautions for Debugging Appendix S5U1C330MxD1 Board A.1 Outline of S5U1C330MxD1 Board A.2 Names and Functions of Each Part A.3 Connecting the System A.4 S5U1C330MxD1 Block Diagram A.5 Program Debugging with a S5U1C33xxxDx Board and S5U1C330M2S Building the sample program Starting up the debug monitor Debugging in the RAM Debugging in the Flash memory Forced break Notes on debugging the user program on the S5U1C33104Dx/S5U1C33209Dx board A.6 Indispensable Signal Pins of S5U1C330MxD1 International Sales Operations AMERICA EPSON ELECTRONICS AMERICA, INC - HEADQUARTERS - SALES OFFICES - West In pursuit of “Saving” Technology, Epson electronic devices Our lineup of semiconductors, liquid crystal displays and quartz devices assists in creating the products of our customers’ dreams Debug Monitor Operation Manual